Compass系统与GPS系统L1频段信号干扰仿真分析     

庄新彦  赵晓东  谭述森  赵文军  郭莉莉 《测绘学院学报》2009,(3)

全球导航卫星系统间的频率兼容性研究已经成为一个热点问题。首先介绍了国际电联建议的卫星导航系统间干扰分析方法;然后根据该方法对Compass系统和GPS系统在L1频段的信号进行了干扰仿真分析,并比较了系统间互干扰和系统自干扰的影响。仿真计算结果表明,除了互用信号L1C和B1C外,其余信号间的自干扰在总干扰中占主导,互干扰的影响相对较小。  相似文献   

Generalized Laplace coefficients and Newcomb derivatives     

Maurizio M. D’Eliseo 《Celestial Mechanics and Dynamical Astronomy》2007,98(2):145-154

It is shown how the generalized Laplace coefficients can be employed to deduce explicit formulas for ordinary and Newcomb derivatives of the Laplace coefficients.   相似文献   

The use of remotely sensed land cover to derive floodplain friction coefficients for flood inundation modelling     

M. D. Wilson  P. M. Atkinson 《水文研究》2007,21(26):3576-3586

Remotely sensed land cover was used to generate spatially‐distributed friction coefficients for use in a two‐dimensional model of flood inundation. Such models are at the forefront of research into the prediction of river flooding. Standard practice, however, is to use single (static) friction coefficients on both the channel and floodplain, which are varied in a calibration procedure to provide a “best fit” to a known inundation extent. Spatially‐distributed friction provides a physically grounded estimate of friction that does not require fitting to a known inundation extent, but which can be fitted if desired. Remote sensing offers the opportunity to map these friction coefficients relatively straightforwardly and for low cost. Inundation was predicted using the LISFLOOD‐FP model for a reach on the River Nene, UK. Friction coefficients were produced from land cover predicted from Landsat TM imagery using both ML and fuzzy c‐means classifiction. The elevetion data used were from combined contour and differential global positioning system (GPS) elevation data. Predicted inundation using spatially‐distributed and static friction were compared. Spatially‐distributed friction had the greatest effect on the timing of flood inundation, but a small effect on predicted inundation extent. The results indicate that spatially‐distributed friction should be considered where the timing of initial flooding (e.g. for early warning) is important. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

中高纬环流因子与黑龙江省初夏气候异常分析     

张健  李永生 《气象与环境学报》2013,29(6):63-67

利用1954-2010年地面气温、降水观测资料和月环流特征量、NCEP高度场再分析资料等,采用常规气候统计方法,分析了黑龙江省初夏6月气温、降水的气候特点,通过初夏6月气温、降水与北半球500 hPa高度场相关分析,建立起与中高纬度环流因子关系。结果表明：黑龙江省初夏气候异常与中高纬度环流异常有关,影响初夏气候异常的中高纬度环流因子主要有亚洲纬向环流指数,阿留申低压指数,亚洲区极涡面积指数,鄂霍次克海的阻塞高压指数等。在此基础上分析大气及中高纬度环流因子的背景,考虑外强迫因子海温的间接作用,掌握中高纬度环流因子的变化,是准确预测黑龙江省初夏气候的关键前提所在。  相似文献   

1960—2018年辽河流域日降水集中程度分析     

刘向培  佟晓辉  贾庆宇  刘晓娜  杨剑刃  薛志阳 《气象与环境学报》2020,36(5):18-24

基于1960-2018年的日降水资料,计算辽河流域降水集中指数（CI）,分析日降水集中程度的时空特征。结果表明：降水集中指数CI可以有效描述辽河流域降水集中程度,辽河流域年CI指数平均为0.67,降水集中程度总体呈现出东部和西部低、南部和北部高的鞍型空间分布特征;夏季降水集中程度最高,各站点季平均CI指数为0.65,空间分布与年分布较一致,冬季平均CI指数最低,为0.60,由东南向西北递减;研究时段内年CI指数表现为不显著的减小趋势,其中东部区域减小的趋势最大;各子区域年CI指数平均变化周期为3 a左右,其中1985年以前,变化周期较短,在2 a左右,1985年以后,变化周期超过3 a。  相似文献   

基于多尺度边缘约束的重力场信号的向下延拓   总被引：27，自引：9，他引：18       下载免费PDF全文

宁津生  汪海洪  罗志才 《地球物理学报》2005,48(1):63-68

利用多尺度边缘检测理论,研究改善重力场信号向下延拓稳定性的新方法,简要介绍了小波多尺度边缘检测的基本原理,以EGM96重力场模型为例分析了地球重力场的多尺边缘。提出了基于多尺度边缘约束的向下延拓方法,并给出了模拟算例。计算结果表明,利用多尺度边缘约束改善向下延拓的稳定性是可行的,在观测值信噪比较差的情况下该方法的效果尤为明显。  相似文献   

地震与核爆识别的小波包分量比方法   总被引：25，自引：5，他引：20       下载免费PDF全文

杨选辉  沈萍  刘希强  郑治真 《地球物理学报》2005,48(1):148-156

频谱分析法在核爆与地震识别中具有广泛的应用．但是频谱分析方法是稳态方法,即使采用Gabor变换,也因时-频窗口形状不变而分辨串较低．为提高时-频分辨率,本文将小波变换理论用于乌鲁木齐台记录的地震与核爆事件的分析,并提出了识别核爆和天然地震的小波包分量比判据．通过对加拿大黄刀地震台记录的印度地下核爆的分析,进一步验证了小波包分量比判据对核爆和地震的识别具有较高的识别效率．结果表明：对于地震信号,其小波包分量比U03/U1一般都大于1.0,而对于核爆信号,比值U03／U13一般都小于1.0.  相似文献   

Chalcophile element partitioning between sulfide phases and hydrous mantle melt: Applications to mantle melting and the formation of ore deposits     

《Journal of Asian Earth Sciences》2014

Understanding the geochemical behavior of chalcophile elements in magmatic processes is hindered by the limited partition coefficients between sulfide phases and silicate melt, in particular at conditions relevant to partial melting of the hydrated, metasomatized upper mantle. In this study, the partitioning of elements Co, Ni, Cu, Zn, As, Mo, Ag, and Pb between sulfide liquid, monosulfide solid solution (MSS), and hydrous mantle melt has been investigated at 1200 °C/1.5 GPa and oxygen fugacity ranging from FMQ−2 to FMQ+1 in a piston-cylinder apparatus. The determined partition coefficients between sulfide liquid and hydrous mantle melt are: 750–1500 for Cu; 600–1200 for Ni; 35–42 for Co; 35–53 for Pb; and 1–2 for Zn, As, and Mo. The partition coefficients between MSS and hydrous mantle melt are: 380–500 for Cu; 520–750 for Ni; ∼50 for Co; <0.5 for Zn; 0.3–6 for Pb; 0.1–2 for As; 1–2 for Mo; and >34 for Ag. The variation of the data is primarily due to differences in oxygen fugacity. These partitioning data in conjunction with previous data are applied to partial melting of the upper mantle and the formation of magmatic-hydrothermal Cu–Au deposits and magmatic sulfide deposits.I show that the metasomatized arc mantle may no longer contain sulfide after >10–14% melt extraction but is still capable of producing the Cu concentrations in the primitive arc basalts, and that the comparable Cu concentrations in primitive arc basalts and in MORB do not necessarily imply similar oxidation states in their source regions.Previous models proposed for producing Cu- and/or Au-rich magmas have been reassessed, with the conclusions summarized as follows. (1) Partial melting of the oxidized (fO₂ > FMQ), metasomatized arc mantle with sulfide exhaustion at degrees >10–14% may not generate Cu-rich, primitive arc basalts. (2) Partial melting of sulfide-bearing cumulates in the root of thickened lower continental crust or lithospheric mantle does not typically generate Cu- and/or Au-rich magmas, but they do have equivalent potential as normal arc magmas in forming magmatic-hydrothermal Cu–Au deposits in terms of their Cu–Au contents. (3) It is not clear whether partial melting of subducting metabasalts generates Cu-rich adakitic magmas, however adakitic magmas may extract Cu and Au via interaction with mantle peridotite. Furthermore, partial melting of sulfide-bearing cumulates in the deep oceanic crust may be able to generate Cu- and Au-rich magmas. (4) The stabilization of MSS during partial melting may explain the genetic link between Au-Cu mineralization and the metasomatized lithospheric mantle.The chalcophile element tonnage, ratio, and distribution in magmatic sulfide deposits depend on a series of factors. This study reveals that oxygen fugacity also plays an important role in controlling Cu and Ni tonnage and Cu/Ni ratio in magmatic sulfide deposits. Cobalt, Zn, As, Sn, Sb, Mo, Ag, Pb, and Bi concentrations and their ratios in sulfide, due to their different partitioning behavior between sulfide liquid and MSS, can be useful indices for the distribution of platinum-group elements and Au in magmatic sulfide deposits.  相似文献   

小波分析若干应用模型及在测绘中的应用和展望＊   总被引：1，自引：0，他引：1  

朱长青  杨启和 《测绘工程》1998,7(1):19-24

小波分析是８０年代中期发展起来的应用数学理论,在众多学科领域取得了广泛的应用。文中首先对小波分析的发展作了简要概述,然后介绍了小波分析在测绘中的应用,对小波分析若干与测绘相关的应用模型进行了分析和讨论,并对小波分析在测绘中的应用前景作了展望。  相似文献   

Dynamical Initialization of Boundary-Layer Data     

G. K. Sen  M. Chatterjee  D. K. Sinha 《Boundary-Layer Meteorology》1998,87(3):509-514

A procedure for the dynamic initialization of wind and temperature fields within the atmospheric boundary layer (ABL) is presented. The procedure uses transilient turbulence theory to assess the turbulent fluxes from observed wind and temperature data, which are used to estimate the eddy transfer coefficients, so enabling a local closure ABL model to be integrated forward in time to a new steady state. The method has been applied to initialize kytoon data taken at Kharagpur (22.3° N, 87.2° E) during the MONTBLEX field programme. Results of a case study for 17 June 1990 are discussed.  相似文献